1. Run the regulator to the full down position, then remove the motor from the regulator.
2. Manually hold the button to run the motor (from full down in step #1) to full up. Repeat for 6 to 10 revolutions to trip the reset feature.
3. Re-install the motor with the regulator arm in the halfway up position.
4. Re-install the regulator assembly and install glass.
5. Raise the glass with the MANUAL function to full up (hold the button for the full duration of the glass travel).
6. Lower with the MANUAL function to full down.
7. Raise with AUTO to full up.
8. Lower with AUTO to full down.
9. Confirm operation.