(Note: Any brief interruption of the steps may require the entire reset to be repeated!)
1. Close both door and the soft-top or hardtop installed.
2. Disconnect and reconnect fuse 57 in the glove box.
3. Open all found windows.
4. Raise the front windows and hold the switches in the up position for at least 3 additional seconds after the window reaches the top.
5. Open the front windows 2/3 of the way down.
6. Close the rear windows completely.
7. Raise the front windows and hold the switches in the up position for at least 3 additional seconds after the window reaches the top.
8. Check whether the reset procedure was successful.