(Note: Steps 4 thru 7 must be done within 5 seconds of each other!!)
1. Turn ignition switch to ON.
2. Lower the window by depressing the switch manually. (Pressing and Holding)
3. Open the door
4. Turn the ignition switch to LOCK.
5. Push down and hold the switch.
6. Turn the ignition switch to ON.
7. Release the window switch.
8. Repeat steps 4 thru 7 three more times.
9. Wait 1 second.
10. Confirm the AUTO UP and AUTO DOWN do not work. If they work, go back to step one.
11. Lower the window all the way by pushing down the switch.
12. Pull up and hold the switch until the window reaches the fully closed position, then continue to hold the switch for one second.
13. Confirm that the power window control unit is reset.